Oil leakage is a common problem of vacuum oil purifiers. The key occurs in the oil window of the vacuum pump, the oil tank gasket, and the motor bearing shaft seal. The key factor is that the vacuum pump has been used for too long, which causes the aging of this part, and the tightness Ineffective, resulting in oil seepage. Oil leakage from the oil window is caused by the aging of the oil window due to the use of the vacuum pump for too long, resulting in cracking, or the aging of the adhesive between the oil window and the oil tank is invalid, thus causing the pump oil to seep out; there are two front oil seals and rear oil seals on the motor shaft. Oil seal, any aging and invalidation will cause oil leakage; the oil tank is connected to the motor through the adapter, and there is a sealing ring at the joint of the oil tank and the adapter, which has the sealing effect of the oil tank. If it is aging, it can cause oil leakage of the vacuum pump.
With the precision, high performance and high pressure of the hydraulic system, the filter effect in the hydraulic equipment is becoming more and more important. Therefore, the proper application of filters can efficiently filter out contaminants in the hydraulic equipment system, protect the machine, and improve the reliability and life of the equipment. The clarification of the filtration performance of the vacuum oil purifier filter When choosing a filter, what level of filtration performance is set is a very important issue.
